Getting Creative With Materials Advice

Steps in Preparing a Concrete Floor In both commercial and residential setups, concrete floors are widely used. Concrete floors exhibit strength and versatility. Most people don’t like the look of rough and unpolished concrete floor. The look, versatility and strength of concrete floors can be improved through some ways. Most people have the polished floor for kitchen, living rooms and bathrooms. For the basement, laundry room and garage, they prefer the epoxy coating. Proper coating preparation has to be done to achieve these features. The contractor might take longer to complete the preparation of the concrete floor. It is however desirable since failure to do this might result in a bad looking coating or one that will age prematurely. If the preparation involves an existing concrete floor, then, a lot has to be done. Closely give a look at the sealant or coating. you have to remove these. If there is excessive laitance, it will have to be removed until solid concrete is revealed. The next step is to clean the concrete surface thoroughly. Special equipment and special chemicals have to be sued to do this. The next step will largely depend on the type of floor finish to be done. In case it is was a new surface; you would only have to pour the concrete. You will use trowels to smooth and floats to bring excessive water to the surface. This is a simple task that can be handled virtually by any person upon doing some practice. The durability and highly resistant to grease and oils make the epoxy coating to be the preference for garages and auto showrooms. Epoxy coating adheres well to rough surfaces. If you are preparing the surface for epoxy coating, you must prepare it to be rough. It can be achieved mechanically or by use of chemicals. Any of these can do the job though the contractor will recommend one with a reason. Another option is to prepare concrete floor for living areas. The process of preparing the concrete floor for home inside is a bit different. It has to be smooth polished floor. This means that a lot of grinding and polishing has to be done to make it best. Most people want to have the concrete floors being stained.
A Simple Plan For Researching Businesses
Acid based stains are the best for concrete floors. The stain is formed by reacting with the concrete. Special soaps are used to neutralize the stain since it is chemically reactive. Plain water will be used to finalize the cleaning. Coating is required for polished floors since they are not strong like the epoxy coating. You should apply a base sealant and then wax above it. Before the sealant loses its usefulness, you can apply wax severally. Consider working with a concrete floor expert all through.A Simple Plan For Researching Businesses